+8618006368428
sellelevator@163.com
When the height of the building exceeds m， the roof of the protective shed should adopt double-layer protection.
7Setting requirements: The installation and disassembly workers electricians and other operators of construction electric lifts should have the qualification certificate for special construction operations.
jЗамок СтабіяBefore use， we should observe whether the electric lift is damaged or not. We can perform a no-load test to rise and fall. If some parts are damaged， they should be replaced in time to prevent major accidents.
Secondly， the lifting platform is driven by electric energy and lifted by the hydraulic system. During the operation， irregular operations are avoided. In order to ensure the normal and orderly operation of the lifting platform and achieve the ideal unloading level，Електричний ліфт the outer side is slightly higher than the inner side by mm，ПескараЕлектричний ліфт з керуваннямІндустрія входить до нового режиму союзництва гарантування якості and there should be m high protective railings and mm high skirting boards on both sides. The platform board must adopt not less than mm thick wooden scaffolding board， and the laying is tight. Bamboo boards and boards with different thicknesses are not allowed. Partial probe boards are not allowed along the running side of the cage. Both sides of the landing platform frame are closed with dense mesh safety vertical nets.
WfSetting requirements: Before starting work every day and before each shift change， the driver of the construction electric lift should inspect the construction electric lift according to the requirements of the instruction manual and specifications， and report any problems found to the user.
The driver of the construction electric lift shall hold the qualification certificate for special construction operations and shall not operate without a certificate.
The fixed electric lift collects the hook height position signal in real time. When the set height is exceeded， it will automatically cut off the lifting circuit of the lifting mechanism and send out an audible and visual alarm signal. The rotation angle signal of the lifting platform is collected in real time. When the set rotation left limit is exceeded the left rotation circuit of the rotation mechanism is automatically cut off， and an audible and visual alarm signal is issued.
nReset the brake; install the maintenance section. The maintenance section is generally installed in the fourth section.
XPromote the use of floor contact devices on the construction site. The gate of the ground protection fence should be equipped with an interlock protection device， which is sensitive and reliable.
KRecommendation and consultationCylinder-type lifting platform The cylinder-type lifting platform is composed of a platform， a telescopic oil cylinder， a single or double-ladder anti-rotation mechanism，Електричний ліфт a chassis oil tank， outriggers， and traveling wheels. The platform has a telescopic oil cylinder to lift directly. When the motor is started， the motor drives the gear pump to supply oil. The oil enters the oil cylinder through the check valve and the electromagnetic channel， and the telescopic oil cylinder rises section by section. When the platform rises to a maximum height， the system pressure also decreases. The working pressure of the rated value is reached. At this time， the oil spill valve is unloaded， and the oil pressure is kept at a constant working pressure. After stopping， the one-way valve maintains the pressure， and the platform stops at the maximum working position，Електричний ліфт and the lifting platform has become an indispensable loading and unloading equipment for the production and life of the whole society.
uZ. Safety passage construction of protective facilities A safety passage should be set up above the ground passage of the electric lift.
So why does the lifting platform have such functions and uses? So many industries need this equipment? Let me share with you what are the components of the lifting platform?
Every theater is a public place with a large number of people， so safety should be considered in stage design. According to the relevant regulations of the state，ПескараЕлектричний ліфт з керуваннямІндустрія входить до нового режиму союзництва гарантування якості in order to prevent accidents due to the electric elevator smashed or improperly controlled by the driver. All electric elevators should be equipped with the following necessary safety devices to make the electric elevator car stop rising or falling in time.
Direct materialq. Safety passage construction of protective facilities A safety passage should be set up above the ground passage of the electric lift.
OThe electric lift should be maintained and cleaned regularly， and the support should be propped up during maintenance and cleaning to prevent the electric lift from rolling over. Electrical appliances and hydraulic systems should be maintained by professionals; when the power display is less than %， it should be charged in time. When the equipment is used for about months (according to the actual frequency of use)， it is necessary to add grease to the rotating parts; check the working status of the pin shaft of the self-propelled electric elevator regularly every month. If the pin shaft is found to be loose， it must be tightened ， to prevent the shaft pin from falling off and causing accidents. The hydraulic oil should be kept clean and replaced every months.
Installation requirements: The protective shed at the ground feed inlet should be set above the feed inlet， the width must be greater than the width of the channel opening， the length must meet the anti-fall radius requirements，Електровий ліфт, електровий ліфт, електровий ліфт, електровий ліфт, електровий ліфт - виробник ціни електрових ліфтів and the width should be greater than the width of the cage.
lЗамок СтабіяEvery theater is a public place with a large number of people， so safety should be considered in stage design. According to the relevant regulations of the state， in order to prevent accidents due to the electric elevator smashed or improperly controlled by the driver. All electric elevators should be equipped with the following necessary safety devices to make the electric elevator car stop rising or falling in time.
zGSetting requirements: The gate of the ground protection fence should be equipped with a door lock device and only when the fence door is in the closed and locked position can the cage be started or kept running.
Routine inspection should be carried out according to the regulations before the operation of the construction electric lift， and the inspection record should be filled in.